Product Profile:

Series reactor is mainly connected with shunt capacitor in order to limit the inrush current in the process of capacitor switching, suppressing the waveform distortion of the grid voltage and controlling the harmonic component flowing through the capacitor, eliminating the damage of the harmonic and overcurrent to the capacitor, in addition, part of the power grid or the electric equipment in order to limit the current mutation also connected to a reactor for limiting current protection.With the continuous development of the power grid, as the indispensable equipment of reactive power compensation device, series reactor is more and more widely used.

Product features:

一.The iron core:

1.High quality cold rolled silicon steel sheet coated with mineral oxide is used as core material

2. The core column is vacuum-cast with epoxy resin so that the air gap between the discus is sealed by the epoxy resin and a resin layer is formed on the surface of the iron column to effectively reduce the vibration between the core cake, thus, the noise is reduced and the insulation strength between the core and coil is enhanced.

3.Sealing F grade epoxy resin on the surface of iron core, corrosion prevention measures should be taken to avoid corrosion.

二.Coil:

1.The coil is a vacuum pouring coil of epoxy resin.The epoxy glass grid cloth is strengthened inside and outside the coil, and the F epoxy pouring system is used in the vacuum state.The coil not only has good insulation performance, but also has high mechanical strength, and can withstand large current shock and cold and hot impact without cracking.

2.Epoxy casting coil does not absorb water, good moisture resistance, partial discharge volume is low, can run safely in harsh environment.

三.Assembly:

1.The end face of the core is made of high quality silicon steel end face glue, which makes the iron core column and the iron yoke firmly combined together, which greatly reduces the noise at the time of operation.

2.Use advanced pre-assembly systems to detect assembly results for each component in the assembly.

3.Advanced vibration and noise reduction structure system, including:An elastic rubber pad is arranged between the clamp part and the coil, and an elastic rubber cushion is arranged between the clamp part and the base.

Model implication:

Series reactor:

1.Rated voltage:6kV、10kV 

2.额 定 频  率：50Hz、60Hz

3. Insulation grade:F

4.Rated operating current:5A~220A

5.Insulation resistance:>100MΩ 

6. Reactor noise:<65DB 

High voltage series reactor related parameters:

High voltage series reactor related parameters:

High voltage series reactor related parameters:

High voltage series reactor related parameters: