Product Profile:

The output AC reactor is used for the load side of the inverter, and the motor current flows through these reactors.The output AC reactor compensates the capacitive charge reversal current of the long cable. If it is a long motor cable, the dv/dt of the motor terminal can be limited.     

Performance characteristics:

1.The core is made of high quality oriented silicon steel sheet core through a plurality of air gap into uniform pieces, the air gap of the high temperature and high strength adhesive will each of the short columns and the upper and lower iron yoke bonded tightly together.

2.The coil adopts F and H insulation system, which greatly improves the reliability of long-term operation.

3.The reactor adopts vacuum pressure impregnation process (VPI). After high temperature curing, the noise and vibration of the product are greatly reduced in operation. The product has high mechanical strength and good moisture resistance.Greatly improves the reliability of long-term operation.

4.The utility model has the advantages of low temperature rise, small loss, high comprehensive utilization rate, and convenient installation. 

Performance parameter:

1.额定工作电压：380V/50/60HZ或690V/50/60HZ

2.Rated operating current:3A~2000A@40℃ 

3.Use altitude:≤2000m  

4.Insulation resistance:>100MΩ 

5.Reactor noise:<65Db

6.Protection level:IP00 

7.Insulation grade:F/H

8.Carrier frequency:0--4KHz 

9.最 大 电  流：1.5*额定电流.持续60S

10.Dielectric strength:3000VAC/50HZ/5mA/60s no arcing breakdown

11.Temperature rise:Iron core≤85K Wire pack temperature≤90K

12.Use environment:-10+45℃, ratings will not reduce the degrees.Up to +55℃.At 45℃ above,  the rated current drops by 2% when the temperature is increased by 1℃

13.Product execution standards:GB10229-88, JB9644-1999 semiconductor electric drive reactor.

Model implication:

Input AC reactor related parameters:

Input AC reactor related parameters: